SUNWIN 400W CNC Air-cooled Spindle Motor PWM Speed Controller Power Supply MountBracket

Price: $199.00
Product prices and availability are accurate as of 2017-11-15 22:22:37 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 1-2 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Spindle motor:
Can be used for engraving metal or nonmetal materials.
Weight :0.9kg
ER11 collect: 3.175mm
Repeat accuracy: 0.01-0.03mm
Diameter of Axis collect holder:16mm
Axis collet Length: 35mm
Diameter:52mm
Motor Overall length: 186mm (includes gripping parts and motor)
Dielectric strength:400V
Insulation resistance:>2Megohm
Torque:500mN.m
Power: 400W
Rotation speed: 3000-12000r/min
Work voltage: 12-48VDC

PMW Speed Controller:
Applies to DC12-60V low voltage permanent magnet brushed DC motor
Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V)
Size :75mm x 75mm x 42mm
Support Mach3

Control Mode:
Default potentiometer control (5K-100K),defaults 10K;
MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control.
Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift).
soft-start function. Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable.
Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W
Pulse width modulation range: 0% -100%

Mount Bracket:
Diameter:52mm
Suit for :400W Brushless High-speed Air-cooled PCB Spindle Motor
Weight : 410g

Power Supply :
Size: 215 x 115 x 50mm
Power Weight: 0.9KG
Output power: 400W
Output voltage: DC48V
Input voltage: AC110/220V 50/60HZ

What is in box ?
1 x 400W Spindle Motor
1 x PWM Speed Controller
1 x Mount Bracket
4 x Screws
1 x Power Supply

Product Features

Can be used for engraving metal or nonmetal materials. Repeat accuracy: 0.01-0.03mm ER11 collect: 3.175mm Axis collet Length: 35mm Power: 400W

Write a Review