Ideal for both craftsmen and hobbyists, the SawStop 1.75 horsepower Professional Cabinet Saw (model PCS175-TGP236) delivers the performance you need with the peace of mind only SawStop's patented safety system can provide. The safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds — resulting in just a nick on a SawStop saw instead of the devastating injury. Built to satisfy the toughest expert users, the Professional Cabinet Saw features superior dust collection and an exacting fit and finish. This model comes with a 36-inch T-Glide fence system for added strength and increased precision as well as rails and extension table.
The Professional Cabinet Saw provides 99 percent dust collection both above and below the table. Above, the dust collection blade guard (sold separately) traps and evacuates fine particles left on the table surface. Below the table, advanced shrouding shapes the turbulent air from the blade to deliver dust to the 4-inch port for collection. The optional TSA-ODC Overarm Dust Collection accessory helps carry the DC blade guard's collected dust away and unites it with the 4-inch port on the back of the saw.
Other features include a riving knife that minimizes kickback and provides protection during non-through cuts, and a left-tilting blade that helps prevent wood from binding against the fence. The Professional Cabinet Saw has a 110-volt power requirement, making it great for the home shop as it delivers the convenience of plugging in anywhere as well as for avid hobbyists and discerning professionals.
For mobility, the optional MB-PCS-000 integrated mobile base offers quick and easy mobility, with two pivoting and two stationary casters. You can also upgrade to the optional MB-PCS-IND mobile base assembly, which features a 1,000 pound lift capacity, four independent pivoting casters, and a hydraulic piston lift.
What if you could stop a saw blade and prevent a serious injury? That sounds like a really good idea.Today, that idea is protecting woodworkers in tens of thousands of SawStop table saws in North America and around the globe.
The SawStop safety system includes an electronic detection system that detects when a person contacts the blade. The system induces an electrical signal onto the blade and then monitors that signal for changes. It can tell the difference between a finger and a piece of wood as the human body has a relatively large inherent electrical capacitance and conductivity, which will cause the signal to drop when a person contacts the blade.
When contact is detected, a fast-acting brake stops the blade, with a heavy-duty spring pushing a block of aluminum (called a brake pawl) into the teeth of the blade to stop the blade from spinning. The teeth cut into the aluminum and bind, thereby stopping the blade in about 3 to 5 milliseconds — or 1/200th of a second.
Other safety features include a main power switch with lockout key to prevent unauthorized users from turning on the saw and a large start/stop paddle with hands-free shutoff that can be stopped with your knee, allowing you to safely stop the blade even when both hands are busy.
According to the Consumer Products Safety Commission, there is a table saw injury every 9 minutes, and 10 amputations every day in the United States. Even the most safety-conscious woodworkers are at risk of an accident. And when that accident happens, the consequences are life-changing: extreme pain and trauma, loss of income-earning abilities, and loss of the ability to pursue hobbies. It's time to protect yourself. The SawStop saw has saved thousands of fingers.
|Motor||1.75 horsepower, 1 phase, 110 volts, 14 amps|
|Cast iron table||20 x 27 inches; 44 x 27 inches with extension wings|
|Extension wing||12 x 27 inches|
|Blade||10-inch diameter, 5/8-inch arbor|
|Maximum depth of cut||3-1/8 inches|
|Maximum depth of cut at 45 degrees||2-1/4 inches|
|Dado||8-inch diameter, 13/16-inch maximum width|
|Arbor diameter at blade||5/8-inch|
|Dust collection port||4-inch diameter|
|Riving knife/splitter||2mm thick|
|Dimensions||69-1/8 x 33 x 34 inches (WxDxH)|
|Cabinet Footprint||19-3/8 x 19-3/8 inches (WxD)|
1.75 horsepower saw with fully enclosed base, 36-inch professional T-Glide fence system, table extension, two adjustable legs, 10-inch 40-tooth combination blade, miter gauge, riving knife, blade wrenches, and owners manual