Mini Metal Shear Brake

Price: $189.95
Product prices and availability are accurate as of 2019-05-31 14:22:28 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

This double-featured miniature machine will save you hours of tedious sheet metal fabrication and finishing. The upper section is equipped with a sharp 7-1/2 inch wide shear that smoothly cuts plastic and circuit board stock up to 1/16 inch thick; soft copper, brass, aluminum and tinplate sheet up to .031 inch thick. The lower section is a powerful bending brake that bends sheet metal up to 90 degrees and 7-1/2 inches wide. The integral gearbox triples the torque you apply to the hand lever so less force is needed to get the job done. Includes six bending dies of various widths for tray and pan forming operations, and adjustable stops for making duplicate parts. Shear blade has four pre-sharpened edges for long life. Overall dimensions: 11 inches wide x 6 inches deep x 13 inches high over handle. Approx. weight 30 lbs.

Product Features

Upper section equipped with sharp 7-1/2 inch wide shear, smoothly cuts plastic and circuit board stock up to 1/16 inch thick; soft copper, brass, aluminum and tinplate sheet up to .031 inch thick Lower section is a powerful bending brake, bends sheet metal up to 90 degrees and 7-1/2 inches wide Shear blade has 4 pre-sharpened edges Overall dimensions 11 inches wide x 6 inches deep x 13 inches high over handle Approx. weight 30 pounds

Write a Review