Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.
Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
Adjustable depth stop and spring action control of the head