Big enough to cut the heavy stuff. The 3 horsepower, 20 amp motor will cut 3/8 inch C.R. Mild steel and most grades of Stainless to 1/4 inch at 35 inch per minute. The shn is primarily designed for straight cuts, but will cut a 12 in radius.
Max cutting speed 35 inches per minute (.9 Meters per minute)
Minimum cutting radius 12 inches (304.8 mm)
Motor - 3 H.P. (3300 Watts) 240 Volts 20 amp
Size of cut width -3/8 inches (9.5 mm)
Starting Hole size - 3 inches (74 mm) in diameter