Dragway Tools® Dust Collector For Model 60, 90, 110, 260 Sandblasting Cabinets
The Dragway Tools® Dust Collector keeps the work area clean and dust free while removing fine particulate from the blasting cabinet for easier viewing.
The Dragway Tools® Dust Collector is a free-standing floor unit for use in conjunction with sand blasting cabinets. This dust collector is housed in a metal cabinet coated in red, high-gloss, industrial enamel paint and weighs 97 lbs. The Dragway Tools® Dust Collector features a 77-inch blue rubber hose with a 2-1/2-inch inside diameter that attaches to a vent hole located on the back of the unit. The vent hole has a 2-1/2-inch outside diameter and the hose connects to unit with an included steel hose clamp.
This dust collector has a hinged front door with two industrial-strength latches and foam seal to keep dust contained and the work area clean.
The Dragway Tools® Dust Collector features two removable polyfelt filter bags for easy cleaning. Polyfelt filter bags can be washed and reused. The polyfelt filter bags have a 3/4-inch eyelet for mounting and fit over a 7-inch hole, secured by hose clamps that lead to the debris collection drawer. The slide-out debris collection drawer has two industrial-strength latches.
The Dragway Tools® Dust Collector features quiet operation and an adjustable air flow exhaust slide to let the user set a desired airflow rate. A sealed, push button ON/OFF switch is mounted on the side. The power cord is 6-1/2-feet in length with a three-prong grounded plug. Blast media shaker bar is located inside the cabinet to move blast media down and out of the filter bags.