BADBOY Blasters has developed this blaster to run soda or any abrasive without changing over any hardware. There is a evacuate valve to remove the media in the blaster. Simply shut that evacuate valve and pour in the desired abrasive or soda. There is no need to convert anything if you deside to go back to any grade soda or media you want to use. This being a pressurized pot you can run any media you like with no concversion. This blaster is one of a kind with it's design. It has an inverted top which means no funnel needed when filling. This design makes it nice since the top is domed inward therefore, there is no need for a funnel when filling. Also, this unit has a pressure seal insert on the fill side of the portable blaster. This is a big safety feature. Unless all of the air is out of the tank the seal will not release. Most others have the screw off type. Simply fill abrasive, hold up on the fill seal, and turn on the air and you ready to blast. We have sold the blasters with the ball valve shut off at the blasting end. We decided to have this sandblaster designed and built with a DEADMAN valve. To start blasting simply compress the handle on the blasting gun and then decompress when you want to stop. This is another safety feature because if for some reason you dropped the gun the abrasive will stop immediately.
DEAD MAN GUN FOR SAFE OPERATION W/4 NOZZLES
BUILT IN WATER TRAP
16 FT BLASTING HOSE