Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output); Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz; ARM9 main control chip; FPGA core algorithm chip; 4.3 inches TFT screen, resolution ratio: 480*272; 17 operational keys; The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A; Support the USB flash disk to read the G code,and the size of G codefile has no requirement; Be equipped with MPG(hand wheel) port and support digital display MPG as well as support the general MPG(hand wheel) in the market. Support the panel key with single-axis manual operation, manual step and CONT operation; Support the operation of quickly specify the running position; Support the multi coordinate systems (with automatically saving function in case of power cut); Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down Outward Appearance, Structure and Size: The DDCSV1.1 adopts the embedded shell structure, which can punch a square hole on the equipment cabinet and then embed this equipment in the squire hole. Use two locking mechanism from the inside can fix this equipment on the equipment cabinet, with easy installation. The panel size of the product is 163mm*102mm*5mm; The size of main body is 156mm*93mm*45mm; The size of square hole installed on the equipment cabinet is 156mm*93mm. Automatically save the data after power down. Fanuc G code compatible. Tool path display.
Servo Motor and Stepper Motor