4 Axis 500KHz Linkage Motion Controller System Offline PLC Control G code+100 Pulse Handwheel MPG for CNC Router Engraving Milling Machine

Price: $259.00
Product prices and availability are accurate as of 2018-10-15 06:30:24 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Package include:

1 x Pendant Handwheel 

1 x 4 Axis CNC Motion controller

1 x 8GB USB Flash drive

1 x USB Extension Cable1.1 Introduction 

        RMHV2.1 is the 4 axis motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor

1.2  Performance parameter of Product

1) Ordinary digital input interface of 16-circuitoptocoupler coupling isolation

2) Ordinary digital input interface of 3-circuit optocoupler coupling isolation

3) Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);

4) Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;

5)  ARM9 main control chip;

6)  FPGA core algorithm chip;

7) 4.3 inches TFT screen, resolution ratio: 480*272;

8) 17 operational keys;

9) The main control equipment is 24-32V power input, the current capacity is required not to be lower than 0.5A;

10)  Support the USB flash disk to read the G code,and the size of G codefile has no requirement;

Handwheel Specification::

1) CNC system and position control of various mechanical devices

2) Metal code disc, high precision, good texture

3) Easy installation

Resolution:100PPR

Supply Voltage:DC5V +/-5%

Supply Current:?80mA

Output Voltage:?2.5V and ?0.4V

Output Current:<40mA

Fall/Rise time:?5ns(typ)

Switch:X1,X10,X100

Axis Switch:OFF,X,Y,Z,4

Response Frequency:0-10KHz

Product Features

Model Number:RMHV2.1;size:163x102x45mm; Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card 4.3 inches TFT screen, resolution ratio: 480*272;Input power:24~32VDC;Output power:0-10V;Power Supply:DC Rated Power:500KHz;MPG Resolution:100PPR;17 operational keys;Support the USB flash disk to read the G code,and the size of G codefile has no requirement; The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.

Write a Review