Products includes: 120pcs hot melt glun gun bar.
Material Main Ingredients:EVA resin, tackifying resin, wax, antioxidant and so on.
Size: diameter 0.27 inch/7mm, length 3.9 inches/100mm.
Softening point: 80 degrees or so.
Hot melt adhesive bar / hot melt adhesive rod storage safety should pay attention to what:
1. Ventilation, dry, cool place.
2. Hot melt adhesive rods melt to avoid touch the skin, so as not to burn together.
3. Equipment cleaning method: with 120 ? mineral oil or paraffin cleaning equipment, gel temperature does not exceed 150 ?. Sealed to prevent moisture.
1. First clean adhesive surface of the object , and use the appropriate hot melt glue gun.
2. The glue rod from the hot melt gun end inserted. Sent to the barrel, through the power preheat 5-8 minutes, the trigger will be able to squeeze the sol, and can control the amount of outing glue.
3. If a stick is not exhausted at one time, then the stick does not have to be removed, the next time you can use the power preheat 5-8 minutes after the direct use.
PACKAGE INCLUDES : 120pcs hot melt glun sticks. Material Main Ingredients: EVA resin, tackifying resin, wax, antioxidant and so on. Size: diameter 0.27''/7m, length 4''/100mm. Color: transparent. Softening point: 80 degrees or so.
FEATURES : short and pithy, easy to carry. Non-toxic, easy to operate, continuous use without carbonization phenomenon with fast bonding, high strength, anti-aging, non-toxic, good thermal stability, film toughness and so on.
WIDE APPLICATIONS : Applicable to plastic, metal, wood, paper, toys, electronic appliances, furniture, leather, handicrafts, shoes, coating, ceramics, shades, food packaging. Used with hot melt glue gun, hot melt machine.
EASY TO OPERATION : Hot melt glun gun sticks are used together with glue gun. Instructions: put the glue rod into the hot melt gun, power heating for a while, pull the trigger, the muzzle will have glue out. You can also directly burn the hot melt with a lighter at one end, painted in the sticky place, waiting for glue into a solid on it. Convenient and easy to use, than the general adhesive glue firmly.
PRECAUTIONS : Storage conditions: ventilated, dry, cool place. Hot melt adhesive rods should be prevented from touching the skin when melting, so as not to burn.