DWP-1257 Variable Speed Wet Stone Polisher has new features to perform better than ever. These improvements include variable speed control switch with an automatic speed feed-back system to maintain consistent RPMS with or without a load. This makes it easier for users to see clearly the correspondence between RPM and the switch position they choose to do their polishing job. Furthermore, DWP-1257 has optimized the gear ratio, increased its torque output, makes the job for the operator much easier and efficient.
Rating : 120Volts 60Hz
Amperage : 7A
Power : 800W
Variable Speed : 700-3,000RPM
Weight : 6.5lbs/2.9kg
Spindle Size : 5/8"-11
Maximum Disc Diameter : 5"/125mm
Ground Fault Circuit Interrupter
Water Valve & Hose
Faucet / Garden Hose Adapter
Lock On Switch
Extra Carbon Brush Set
Side Handle, C Handle
Important Note: It is very important to install the splash guard and control the amount of water used when polishing. You only need to keep the surface slightly wet to prevent dusts, otherwise water can go in the motor and lead to GFCI power protection to kick in and shut it down. When this happens, you need to wait for the motor to dry completely before push the RESET button on GFCI in order for the polisher to work again. This will cause delay in work time and affect motor life.
1 month warranty for professional use.
We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing.