Generic CNC Spindle 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

Price: $239.99
Product prices and availability are accurate as of 2017-09-21 16:19:47 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

500W Spindle Motor + 110V Speed Governor with MACH3 + Mount bracket + 13PCS ER11 collect + 4 Screws

Feature:
Input: AC110V± 10%50/60Hz
Operating voltage: 100VDC
Power: 500W
Current: 4A
Speed: Up to idle up to 12,000 rev / min
Torque: 5000G/CM
Insulation resistance:> 2 megohms
Dielectric strength: 400V
Diameter: 52mm
Chuck portion length: 45MM
Chuck portion diameter: 16mm
Motor Length: 200MM
High precision spindle runout 0.01-0.03
Power supply Specification: (and this spindle supporting the use of the)
13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm), Run-out tolerance 0.01mm (0.0006")

Package including:
1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount bracket
13 x ER11 collect
4 x Screws(free)

Product Features

Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm. Motor Length: 200MM, High precision spindle run out 0.01-0.03 100% service satisfactory, If you have any questions, please contact us

Write a Review